| 单词 | lag screw |
| 例句 | Holes are provided in the Press for mounting by lag screws or bolts. The Automobile Storage Battery Its Care And Repair The girder molds were 1½-in. stuff, and to the side pieces were nailed 1×4-in. cleats; the bottom and side pieces were connected by ⅜×4-in. lag screws spaced 28 ins. apart. Concrete Construction Methods and Costs Bore the holes for the lag screws, being careful to bore on adjacent surfaces so that the holes will miss each other. Mission Furniture How to Make It, Part 2 Have the two end rails exactly the same length and proceed to fasten the front and back posts to them, using 4-in. lag screws and washers. Mission Furniture How to Make It, Part 3 Fasten the front top board to the crosspieces by lag screws through from the under side. The Boy Mechanic: Volume 1 700 Things for Boys to Do Use a 3/8 by 3-in. lag screw, boring the hole in the tenon with a 1/4-in. bit the full depth the screw is to enter. Mission Furniture How to Make It, Part 2 If the lag screws are used, the tenons may be what are known as stubb tenons—tenons of short length. Mission Furniture How to Make It, Part 2 These mortises need not be deep if the joints are to be reinforced later with lag screws as is the clock shown. Mission Furniture How to Make It, Part 2 Bore through the posts and part way into the ends of the end rails for the lag screws. Mission Furniture How to Make It, Part 3 They are set in the runner plank 1/4 in. and fastened with glue and 1/2-in. lag screws. The Boy Mechanic: Volume 1 700 Things for Boys to Do In the photograph the front posts have their tops cut off square and the arms fastened to them by means of lag screws. Mission Furniture How to Make It, Part 2 Cut tenons on the rails and mortise the posts, then fasten them securely together with 3/8 by 5-in. lag screws as shown. The Boy Mechanic: Volume 1 700 Things for Boys to Do In the chair shown, the joints are reinforced by the addition of lag screws. Mission Furniture How to Make It, Part 2 The handles are rounded at the ends and are fastened to the board with lag screws or bolts. The Boy Mechanic: Volume 1 700 Things for Boys to Do The block A is fastened to the board with lag screws and should be a working fit between the wo plates where it is held by means of the 5/8-in. bolt. The Boy Mechanic: Volume 1 700 Things for Boys to Do |
| 随便看 |
|
英语例句辞典收录了117811条英语例句在线翻译词条，基本涵盖了全部常用单词及词组的例句翻译及用法，是英语学习的有利工具。