Well, I think you broke the dowels. You're not gonna have time to glue it back on, you'll have to nail it.

你可能把暗榫弄坏了。你没有时间把它粘回去了，只能用钉子钉上。

You'll also need two dowels, which are basically long, straight wooden sticks.

您还需要两个销钉，它们基本上是长而直的木棍。

They'd say, once again… also, I have a bunch of wooden dowels.

他们会再说一遍… … 还有，我有一堆木销钉。

Now you can tape the dowels to the plastic.

现在您可以将销钉粘到塑料上。

Use your ruler to draw a diamond around your dowels, like this.

用你的尺子在你的销钉周围画一个菱形，就像这样。

Now tape the dowels together in the middle.

现在将销钉粘在中间。

But so, I have a bunch of… they're… I think they're called hex wrenches, and then wooden dowels.

但是，我有一堆… … 它们… … 我想它们被称为六角扳手，然后是木销钉。

On the curved apse roof, finished on January 12th, wooden dowel pegs hold the trusses together without a single industrial metal piece.

在1月12日完工的半圆小室的弧形屋顶上，木榫钉将桁架固定在一起，没有使用一个工业金属部件。

It's good to make sure the diamond is a little bit bigger than your dowels to make sure it fits.

最好确保钻石比销钉大一点，以确保它合适。

Poke two holes in the plastic along the dowel that goes across the kite lengthwise.

沿着纵向穿过风筝的销钉在塑料上戳两个洞。

They should be close to the corners, but not all the way at the end of the dowels.

它们应该靠近角落，但不要一直到销钉的末端。

Cut a smaller piece of string, about two times as long as one of the dowels.

剪一小段绳子，大约是其中一个销钉长度的两倍。

Lay the dowels across the plastic in a cross shape, with one of the dowels a little higher so one half is longer than the other.

将销钉以十字形穿过塑料，其中一根销钉稍高一点， 因此一半比另一根长。

Exactly; I think if we accelerate these things… what if… here's the thing; what if IKEA's wooden dowels were hex dowels?

确切地;我想如果我们加速这些事情… … 如果… … 事情是这样的；如果宜家的木销钉是六角销钉会怎么样？

Next, flip the kite over and thread one end of the string through one of the holes and tie it to the dowel, and do the same thing with the other end of the string and the other hole.

接下来，将风筝翻转过来， 将线的一端穿过其中一个孔并将其系在销钉上，然后对线的另一端和另一个孔执行相同的操作。